| Brand Name: | PM |
|---|---|
| Minimum Order Quantity: | 10 |
| Delivery Time: | 1-25 work days |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
| Diameter: | 4-30mm | Length: | 330mm |
|---|---|---|---|
| Co%: | 6-15% | HRA: | 90-95 |
| Hardness HV30: | 1570-2200 | Density(g/cm3): | 13.8-15.0 |
| Material: | Tungsten Carbide | ||
| Highlight: | 2 Coolant Hole Tungsten Carbide Rod,Tungsten Carbide Rod Blanks,Carbide Rod Blanks 13.8g/Cm3 |
||
Tungsten Carbide Ground Rods with 2 Straight Coolant Hole for Dirlling and Milling Tools
Our rods have different grade and right to use on different application; Specially we are produce the Nano Grain carbide (Grain＜0.2µm); Our rods are with high hardness and wear/corrosion resistance, all products with stable quality;
l Dimension: diameter from 2-42mm, length 310/330mm;
l Use for Finish milling
l Grind with h6/h5 tolerance
| Ground Rods with 2 Straight Coolant Holes | |||||||||||||||||||||
| Diameter | Length | Hole Spacing | Grade | ||||||||||||||||||
| amax(mm) | |||||||||||||||||||||
| D(mm) | Toleance | L(mm) | Toleance | TK(mm) | Toleance | d(mm) | Toleance | ST20F | ST15D | ||||||||||||
| 4.0 | h5 | 330 | +2.0～+6.0 | 1.80 | +0/-0.15 | 0.80 | ±0.10 | 0.10 | ○ | ○ | |||||||||||
| 5.0 | h5 | 330 | +2.0～+6.0 | 2.00 | +0/-0.15 | 0.80 | ±0.10 | 0.13 | ○ | ○ | |||||||||||
| 6.0 | h5 | 330 | +2.0～+6.0 | 1.50 | +0/-0.20 | 0.90 | ±0.10 | 0.15 | ○ | ○ | |||||||||||
| 6.0 | h5 | 330 | +2.0～+6.0 | 3.00 | +0/-0.20 | 1.00 | ±0.10 | 0.15 | ○ | ○ | |||||||||||
| 7.0 | h5 | 330 | +2.0～+6.0 | 3.50 | +0/-0.20 | 1.00 | ±0.15 | 0.15 | ○ | ○ | |||||||||||
| 8.0 | h5 | 330 | +2.0～+6.0 | 2.60 | +0/-0.30 | 1.00 | ±0.10 | 0.15 | ○ | ○ | |||||||||||
| 8.0 | h5 | 330 | +2.0～+6.0 | 4.00 | +0/-0.30 | 1.00 | ±0.15 | 0.15 | ○ | ○ | |||||||||||
| 9.0 | h5 | 330 | +2.0～+6.0 | 4.00 | +0/-0.30 | 1.40 | ±0.10 | 0.20 | ○ | ○ | |||||||||||
| 10.0 | h5 | 330 | +2.0～+6.0 | 3.50 | +0/-0.30 | 1.20 | ±0.10 | 0.20 | ○ | ○ | |||||||||||
| 10.0 | h5 | 330 | +2.0～+6.0 | 5.00 | +0/-0.30 | 1.40 | ±0.15 | 0.20 | ○ | ○ | |||||||||||
| 11.0 | h5 | 330 | +2.0～+6.0 | 5.00 | +0/-0.30 | 1.40 | ±0.15 | 0.28 | ○ | ○ | |||||||||||
| 12.0 | h5 | 330 | +2.0～+6.0 | 3.50 | +0/-0.30 | 1.20 | ±0.15 | 0.30 | ○ | ○ | |||||||||||
| 12.0 | h5 | 330 | +2.0～+6.0 | 6.00 | +0/-0.30 | 1.75 | ±0.15 | 0.30 | ○ | ○ | |||||||||||
| 13.0 | h5 | 330 | +2.0～+6.0 | 6.00 | +0/-0.30 | 1.75 | ±0.15 | 0.34 | ○ | ○ | |||||||||||
| 14.0 | h5 | 330 | +2.0～+6.0 | 5.00 | +0/-0.30 | 1.50 | ±0.15 | 0.37 | ○ | ○ | |||||||||||
| 14.0 | h5 | 330 | +2.0～+6.0 | 7.00 | +0/-0.30 | 1.75 | ±0.15 | 0.37 | ○ | ○ | |||||||||||
| 15.0 | h5 | 330 | +2.0～+6.0 | 7.00 | +0/-0.30 | 2.00 | ±0.15 | 0.40 | ○ | ○ | |||||||||||
| 16.0 | h5 | 330 | +2.0～+6.0 | 5.00 | +0/-0.30 | 1.50 | ±0.15 | 0.40 | ○ | ○ | |||||||||||
| 16.0 | h5 | 330 | +2.0～+6.0 | 8.00 | +0/-0.30 | 2.00 | ±0.20 | 0.40 | ○ | ○ | |||||||||||
| 17.0 | h5 | 330 | +2.0～+6.0 | 8.00 | +0/-0.30 | 2.00 | ±0.20 | 0.47 | ○ | ○ | |||||||||||
| 18.0 | h5 | 330 | +2.0～+6.0 | 9.00 | +0/-0.30 | 2.00 | ±0.20 | 0.50 | ○ | ○ | |||||||||||
| 19.0 | h5 | 330 | +2.0～+6.0 | 9.00 | +0/-0.30 | 2.00 | ±0.20 | 0.50 | ○ | ○ | |||||||||||
| 20.0 | h5 | 330 | +2.0～+6.0 | 10.00 | +0/-0.40 | 2.50 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 21.0 | h5 | 330 | +2.0～+6.0 | 10.00 | +0/-0.40 | 2.50 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 22.0 | h5 | 330 | +2.0～+6.0 | 11.00 | +0/-0.40 | 2.50 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 23.0 | h5 | 330 | +2.0～+6.0 | 11.00 | +0/-0.40 | 2.50 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 24.0 | h5 | 330 | +2.0～+6.0 | 12.00 | +0/-0.50 | 3.00 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 25.0 | h5 | 330 | +2.0～+6.0 | 12.00 | +0/-0.50 | 3.00 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 28.0 | h5 | 330 | +2.0～+6.0 | 14.00 | +0/-0.50 | 3.00 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 30.0 | h5 | 330 | +2.0～+6.0 | 14.00 | +0/-0.50 | 3.00 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
| 32.0 | h5 | 330 | +2.0～+6.0 | 14.00 | +0/-0.50 | 3.00 | ±0.25 | 0.50 | ○ | ○ | |||||||||||
