Detail Information

Features:	High Hardness	Type:	Power Tool Parts,Construction Tool Parts,Mining Drill Bits,Hand Tool Parts
Material:	100% Virgin Tungsten Carbide	Application:	Drilling,Rock Drills,Oil Cone Drill Bits,anti-corrosion,Suitable For Making Oil-field And Mining Drill Bits
Grade:	G206,G506,G208,G308,G211,G215,G510,G512,G513,G707,G806	Product Name:	Milling Bits,Mining Teeth,tungsten Carbide Piece,Drill Bit Inserts Cemented Tungsten Carbide Dome Buttons
Advantage:	Wear Resistant,Wear ResistantSuperior,High Performance	Color:	Gray,black Alloy
Sample:	Carbide Button Samples Available	Keywords:	Tungsten Carbide Button Tungsten Carbide Teeth Tungsten Carbide Tip,tungsten Carbide Spherical Button,tungsten Carbide Mining Teeth
Hardness:	HRA89-HRA92.9,87 HRA,85-89.5 HRA	Surface Treatment:	Finish Grounded,Ground And Polished
Commodity Name:	Power Tool Parts,Carbide Buttons,High Quality Tungsten Carbide Punch Balls	Process:	Sinter-HIPed,powder Prepraring-pressing-sintering-processing-finishing
Shape:	Spherical,flattop,conical,Auger Tips,bolistic	Density:	14.05-14.95 G/cm3,14.14 G/cm3,13.90-14.90
Feedback:	Within 24 Hours
High Light:	ISO Cemented Carbide Tips , Carbide Brazing Tips For Cutting Tools , Cemented Carbide Tips Cutting Tools

Product Description

Cemented carbide for geological exploration drilling tools T40 type

Grade Introduction of Mineral
Grade	Co	Grain Size of WC	Hardness		Density	Flexural Strength	Bending Tough- ness	Elastic Modulus	Coeffi- cient of Thermal Expan- sion	Application
	Co%		HRA	HV₃₀	g/cm³	MPa	N/mm²	GPa	10^-6/°C
G206	6	Medium	90.8	1500	14.9	3200		530	4.9	Suitable for DTH drilling with high wind pressure
G506	6	Coarse	88.0	1200	14.9	2500		530	4.9	Suitable for gear shaper cutting of concrete and asphalt road
G208	8	Medium	89.1	1300	14.7	2750		510	5.1	Suitable for DTH drilling with medium and low wind pressure,and rock breaking
G308	8	Medium	88.8	1270	14.7	2750		510	5.1	Suitable for tri-cone drill bit in milling, and tri-cone
G211	11	Medium	88.0	1200	14.4	2800		478	5.6	tri-cone drill bit in milling, drill bit in engineering
G215	15	Medium	86.8	1100	14	2800		430	6.3	Suitable for oilfield composite sheet
G510	10	Coarse	86.2	1040	14.5	2700		490	5.4	Suitable for rotary drilling cutter, and coal cutters
G512	12	Coarse	86.0	1030	14.3	2900		470	5.7	Suitable for tunnel boring machine of scraper,cut- ter and wear plate
G513	13	Coarse	85.6	1000	14.2	2900		460	5.8	Suitable for tunnel boring machine of scraper,cut- ter and wear plate
G707	7	Extra Coarse	86.3	1050	14.8	2200		520	5	Suitable for hard rock in engineering, and DTH drilling cutter
G806	6	Extra Coarse	86.2	1040	14.9	2100		530	4.9	Suitable for high rock of rotary drilling cutter

ISO Standard Cemented Carbide Tips , Carbide Brazing Tips For Cutting Tools 0

Hunan Boyun Dongfang Powder Metallurgy Co., Ltd. was founded in 1994 by the Institute

of powder metallurgy of Central South University of Technology (now the research center

of powder metallurgy engineering of Central South University) and Hunan Yinzhou Co.,

Ltd. (now the wholly-owned member company of China Dongfang asset management

company, Bangxin Asset Management Co., Ltd.),now it is the holding subsidiary of

Hunan Boyun New Material Co., Ltd. (Stock Code: 002297), with a registered capital

of 60 million yuan.The company is a national high-tech enterprise with Academician

Huang Boyun, the top material scientist in China, as the chief scientist and honorary

chairman of the board, integrating domestic and foreign talents and technological

advantages, integrating production, learning, research and application, engaged in the

research, development, production and sales of high-performance cemented carbide.

The member of China Tungsten Industry Association, China mold industry association,

ISO Standard Cemented Carbide Tips , Carbide Brazing Tips For Cutting Tools

ISO Cemented Carbide Tips